A full-face helmet is by far the safest and most widely used helmet today, but finding one with a low profile can be challenging.
A lot of people simply don’t like the bulging full-face helmets that make them look like mushrooms. Likewise, if that’s the case for you as well, you may decide not to wear a helmet at all. Yet, safety must be your top priority, and you should never skimp on your helmet, as doing so can put your life at risk.
If you have a small head, you can still get a low-profile look because there are many quality full-face helmets available on the market that are made with the smallest shells, so they will fit you well, and you will get that low-profile look.
We’re an affiliate
We hope you will love the products we recommend! It is to assure you that we may get a commission if your purchase anything from the links on this page. This wont cost you extra. Many thanks if you use our links, we appreciate it!
However, you should always choose a helmet that is designed to fit the shape of your head, meaning that it sits snugly against your scalp.
Check out the list of some of the best low-profile full-face motorcycle helmets below.
Best Low Profile Full-Face Motorcycle Helmet (Reviews+Comparison)
|TopTop Top||Bell Race Star Flex DLX Helmet||PrimeEligible||Check Latest Price|
|Top Top||Bell Bullitt Carbon Full-Face Helmet||PrimeEligible||Check Latest Price|
|Top Top||Shoei RF-1200 Variable Men's Street Low profile Motorcycle Helmet||Prime||Check Latest Price|
|Top Top||Bell Qualifier Low Profile Helmet||PrimeEligible||Check Latest Price|
|Top Top||Bell Bullitt Low Profile Helmet||PrimeEligible||Check Latest Price|
1- Bell Race Star Flex DLX Low Profile Motorcycle Helmet
- 3K Carbon Shell Construction
- Speaker Pockets
- Triple-Density Cheek Pads
- Added Comfort Lining
- ProTint Photochromic Shield
- DOT approved.
The new race star flex DLX is going to be the new top-of-the-line helmet from Bell. This helmet comes with a lightweight carbon shell, and it weighs three pounds, and five ounces in a medium-size, which means it’s an extremely lightweight race helmet. It is a low-profile full-face motorcycle helmet, having five shell sizes, and six EPS liners, so each of the sizes will get a different shell except for the extra small and small shell size.
Further, it’s a DOT Snell-rated helmet and comes in an intermediate oval head shape. So, they revised the internal shape of this to give you a little more room upfront. The helmet fits a hundred percent better than the previous version, as it is a little bit longer front to back, and narrows down the side of the head, meaning this is going to work for the majority of riders in the American market.
This helmet comes with the Flex technology, so as we break down the inside, we notice that it is made up of three different layers, instead of just a single EPS. The outer EPS layer is for your high-speed impacts, the inner red EPP one is your mid-speed protection layer, and then the black EPO is going to be right against your head.
The other thing you’ll notice here is that you now have the Pro tint shield included with this. This is going to be an actual shield that will change tint based on whether it’s light or dark out and it does it relatively easy and relatively quickly.
The vents on this work well; you’re going to have a chin vent, a brow vent, a vent at the top, plus an active vent at the back. If you look at this helmet you can see that you get cool Ridge profiles that work across the top. Bell did a great job from a fit and finish standpoint.
Moreover, it features a magnetic latch, which locks into place and secures your extra strap length. The magnetic cheek pads work fantastically, they stay in place. However, if you’re installing a communication system or just want to clean them, you can easily pull them out and fit them back in.
Bell is now using a dual-density foam, having a softer foam at the top that’s sitting against your face, and then a thicker firmer foam that sits at the base. Overall, it is a great helmet with amazing specs, which comes at a reasonable price point as well.
Why should you buy this?
This helmet has the Flex in the name, which means it comes with the Flex technology from Bell. Here, the shell is made of three layers, and what such a design does is that it protects you from impacts of varying speeds.
- Lightweight carbon shell
- Flex technology
- Magnetic latch
- There may be some sizing issues
2- Bell Bullitt Carbon Low Profile Full-Face Motorcycle Helmet
The Bell bullet is inspired by the original Bell star; it’s got vintage vibes that meet modern protection. The helmet weighs 2.82 pounds and the shape of this helmet is round oval. It fits differently than an intermediate oval so be sure to try it on. Since this helmet’s shape is round oval, people with intermediate oval head shapes will have to go up a size for a perfect fit.
The Bell bullet carbon is constructed of a low-profile fiber composite shell and multi-density EPS liner, and it meets modern DOT regulations, yet comes as close as possible to the look and feel of the original star.
Moreover, the interior is equipped with premium features like circular air intake vents and rear exhaust vents built from metal mesh, micro-suede lining, and leather trim, as well as 3D cut cheek pads having speaker cutouts; all of which enhance the vintage aesthetic and update it for the 21st century.
Regarding tech specs, it has a low-profile carbon composite shell, it does come in three shell sizes, and has a removable, washable, and antibacterial microsuede interior, plus a padded chinstrap with the deer enclosure, front chin vents with metal mesh intake, and exhaust vents, contoured cheek pads, integrated speaker pockets, and Magna Fusion magnetic strap keeper on the visor.
It comes with a five-year warranty, with DOT and ECE certification. Furthermore, the shields come in clear dark, smoke, silver iridium, Gold iridium, and the bubble shields come in clear, dark, smoke, gold iridium, yellow or amber gradient.
The interior padding is super nice, and the ear pads have these little pockets for a set of communication systems. The fabric feels very nice, and it is nicely padded in the back of the neck roll, and the forehead area. Further, it features traditional D-ring straps and these do extend down below far enough to where the metal isn’t touching you.
This helmet breathes well, as it has small vent holes, which channel back to the single exhaust vent. The padding is quickly and easily removable if you want to remove it and wash it.
Why should you buy it?
One of the big reasons that we do like this helmet is because of the look, as it has that retro, vintage vibe to it.
- Low-profile look
- Circular air intake vents and rear exhaust vents
- Vintage aesthetics
- Wide field of view
- It’s a bit pricey
3- Shoei RF-1200 Low Profile Motorcycle Helmet
The RF-1200 is a cutting-edge helmet designed for riders seeking the best performance and technology in a full-faced helmet. Like its many predecessors, the RF-1200 is among the best motorcycle helmets currently available.
Helmets should be lightweight and comfortable, so wearing one won’t be a challenge. Hence, SHOEI’s RF-1200 helmet offers next-level functionality in a lighter, low-profile, and more compact design.
In addition to providing a superior field of vision, the shield system of the RF-1200 features innovative design elements that increase rigidity and reduce bending, enabling you to change your shields more quickly than ever before.
The protective shell and liner are perhaps the most crucial aspects of a motorcycle helmet, something that the RF-1200 offers through its dual-layer, high-density EPS liner in addition to SHOEI’s Multi-Ply Matrix AIM+ shell.
As part of its features, the RF-1200 has a fully removable, replaceable, washable, and adjustable 3D Max-Dry System II interior designed to dissipate sweat nearly twice as fast as nylon. Further, it not only complies with DOT and SNELL M2015 safety standards but also provides one of the most comfortable riding experiences ever.
Why should you buy this?
A compact, aerodynamic shape, and wind tunnel testing make it optimal for reducing wind noise, buffeting, and weight.
- A vast field of vision
- Lighter, low-profile, and more compact design.
- Sweat-wicking interior
- Not known
4- Bell Qualifier Adult Full-Face Motorcycle Helmet
Lightweight, and suitable for a wide array of riding applications, the Bell qualifier helmet is an ideal choice for many riders. This is an all-purpose helmet, so whatever your riding style may be, this helmet will fit your needs.
Let’s start with the overall construction of this helmet. It is made of polycarbonate and comes in three different shell sizes, which will help lighten it up a bit. Having three sizes at a price point like this is pretty exceptional.
Further, this helmet weighs three pounds five ounces in a medium size and has the DOT and ECE ratings as well. Let’s talk about the fit; the qualifier helmet is very comfortable to wear and fits true to size. In addition to available sizes XS to 3XL, it comes in several color options, as well as a variety of different graphics to choose from.
In addition, it has an intermediate oval internal shape, so it’s a bit more elongated from front to back than from side to side.
To allow adequate airflow through the helmet and the EPS, and to keep you comfortable while you ride, the helmet has a chin vent, two vents on top, and passive vents at the back.
Moreover, there are 12 color varieties of the shield, including a race version with built-in tear-offs as well as a photochromic version that changes from light to dark when you’re riding under the sun.
Now moving to the interior of the helmet, we have a fully removable antibacterial liner inside the helmet, so you can remove it, wash it, and replace it. In this way, you can keep the helmet fresh throughout its lifespan.
Additionally, there is a recessed area for speakers, so if you wish, you can add a Bluetooth communication system; another nice benefit you’ll get from the qualifier, especially at this price point.
Why should you buy this?
We have large channels at the top of the helmet so you’re going to get great airflow.
At the back, we have a spoiler that will help with that centrifugal force and help this helmet maintain stability when you’re riding at high speeds.
- Wind collar significantly reduces road and wind noise
- A click-release shield for quick, easy, and tool-free replacement
- Lightweight and comfortable
- The chin opening lets too much air in, so it is not suitable for cold climates
5- Bell Bullitt Full-Face Low Profile Motorcycle Helmet
The new Bell Bullitt helmet is a direct homage to the original Bell Star helmet, but it’s the classic retro style that makes it so appealing to today’s motorcyclists. To make sure it meets DOT regulations, it has a multi-density EPS liner and a low-profile carbon composite shell.
The biggest thing we like about it is how well it fits; it has an intermediate oval shape, so it will be longer front to back, similar to what we see in other Bell models. There’s no doubt that your head will fit perfectly into this helmet.
One thing that stands out about this helmet is the vent scheme that looks great for a retro helmet. There is a switchable chin vent, which you can switch on and off from behind the chin bar, as well as four vents that vent directly to the EPS liner along the brow. In the back, you can see a venturi vent that gives you that great airflow, keeping you cool in summer.
Furthermore, the lock on the face shield is magnefusion; they’ve integrated a diode magnet into the shell itself, and you can pull everything together with the leather-coated magnet.
Its interior is made of real leather and is completely removable, washable, and antimicrobial. In addition, there are cutouts to accommodate communication speakers as well.
Additionally, the helmet comes in a variety of colors, as well as a variety of face shield styles, from flat to bubble, which allows you to customize the look of the helmet.
Why should you buy this?
This helmet combines classic throwback, retro design with premium built, modern protection, and a comfortable interior.
- Classic retro style
- Removable, washable, and antimicrobial interior
- Great ventilation
- Not comfortable with communication system