How to Measure Your Head for a Horse Riding Helmet

How to Measure Your Head for a Horse Riding Helmet?

If anything goes wrong while riding a horse, a helmet is essential for protecting your head. A horseback riding accident is most likely to cause head trauma. When you wear a properly fitted riding helmet, your chances of getting a head injury are significantly reduced.

Nonetheless, a helmet will not protect you adequately if it is not properly fitted. When you measure correctly, you can ensure that you are fully protected when you are on horseback.

Also, wearing a poorly fitted helmet can negatively affect your riding performance. For example, wearing a helmet that is too tight may cause discomfort and distractions. An overly loose helmet may cause the brim to slide into your eyes, making it difficult to see. Thus, a well-fitted helmet is important not only for safety but also for performance.

When purchasing a horse riding helmet online, make sure you take accurate measurements at home to avoid receiving an ill-fitting one. Here is a guide on “how to measure your head for a horse riding helmet”, which will help you find the best fitting helmet, whether you are buying your first one or replacing an old one.

How to measure your head for a horse riding helmet

It takes some time to find the right fit. You should measure your head properly before buying a helmet, but that’s just the beginning. Measurement serves as a guide. When it comes to your first horse riding helmet, you should try several models to find the one that feels most comfortable to you and is best suited to your head shape.

The following instructions will show you how to measure your head and get the right riding helmet.

Take your head’s circumference

Before you measure your head, be sure to remove all clips and slides. Next, comb your hair the way you will wear it with the helmet. You must pay attention to this as clips, ponytails, or other styles can alter the size of the helmet you need. Also, put your glasses on if you wear them when you ride.

Now, measure the width of your head one inch above your eyebrows by using a soft fabric measuring tape. Make certain that the tape fits snugly on your head and passes over the curvature of your head at the back right above your ears. 

You can also use a string instead of a flexible measuring tape, making sure you keep your finger on the end of the string as you wrap it around your head. Once you’ve measured the string, lay it flat on the yardstick to get the correct measurements.

The result will be a simple guideline of your size. Use the manufacturer’s size guide to compare your measurements and determine the right size for you.  Verify that the helmet size chart you are using is the correct one (adult or youth). Then, choose the size that corresponds to your measurement on the chart.

You should take note of the size in inches and centimeters since companies may use either unit. You might want to ask your friend to help you measure if you want to make sure you get the correct measurements.

measuring circumference of head

Examine the helmet’s fit

Try the helmet on when it arrives. There should be no pinching anywhere on the head while wearing the helmet.

Be sure the helmet sits approximately one inch above your eyebrows. You should see your eyebrows move up and down as you move the helmet around on your head while wearing it. That indicates the helmet fits correctly.

Fine-tune the inner fit

Then adjust the fit based on your head shape. Make sure there are no gaps in the fit. A helmet can effectively absorb the shock from an accident if it has even pressure all around.

It should not rest too low on the forehead, because in that case, it will be large for you. And if it does not fit properly or shows gaps, the size is too small.

Adjust the padding in the lining if necessary to make sure the helmet fits snugly all over. Moreover, your helmet may have a dial that can be turned to tighten or loosen the fit.

Chinstrap adjustments

Put the helmet back on after adjusting the interior fit. Make sure the chin strap fits snugly and comfortably under your chin by fastening it. There are V-shaped straps on both sides. Ideally, this V should be located right below the ear, so make sure the straps are adjusted accordingly on each side. These straps should keep the helmet in place without causing discomfort. 

Also, buckles should lie directly beneath the chin. When buckled, two fingers should fit between the straps. Generally, too loose is when more fingers fit, and too tight when two fingers cannot fit. If necessary, adjust it to fit properly. 

Once the helmet is buckled, make sure that it is still properly seated. In front, the brim should sit one to two fingers above your eyebrows, so that it does not block your vision. 

chin strap adjustment

Why it’s Important to Wear a Horse Riding Helmet

As a rule, don’t ever wear a bike or another type of helmet while horseback riding. The standards differ from one helmet type to another. Horseback-riding helmets are intended to prevent accidents related to riding horses. 

Helmets designed for horseback riders feature additional padding in their sweatbands and backs of their heads. In addition, they are evaluated for shock absorption, wearing comfort, and puncture resistance. Consequently, if you ride a horse, you should get a proper horse riding helmet. 

Final words

It is important to find a helmet that fits well, both for performance and safety reasons. Firstly measure your head’s circumference, then try on the helmet, fine-tune the inner fit according to your head’s shape, and finally adjust the chin strap. With the right helmet, you’ll be protected during an accident and will feel more comfortable.

Hopefully, this article will help you understand How to measure your head for a horse riding helmet.  

Leave a Reply