Do you ride a motorcycle daily and biking is the primary source of your transport?
Then, you will undoubtedly have faced the problem of the haunting noise on the road due to traffic and the wind that passes through your helmet.
Even the noise of your bike’s engine can also be unbearable sometimes. Some sources claim that these noises can be high up to 110 decibels, which can be very hazardous to your hearing capacity since exposure to a noise level of 85 dB and higher can cause serious hearing problems.
For this issue, a helmet specially built for noise reduction can be a great solution. A quite helmet will give you a calm riding experience by cutting off all the harsh sounds on the road.
But you have to make sure that despite being quite, the helmet you are getting can protect you well also. After all, your safety should be your primary preference.
There are plenty of helmets available out there, which are best for people who ride bikes for longer spans and want to block out that unpleasant noise.
Choosing one for yourself can be quite confusing sometimes. Therefore, to bring you at ease, we have listed some of the Best motorcycle helmets for noise reduction with many more attractive features.
Looking for best GoPro for your helmet? We have a list of best GoPro for helmet
Table of Contents
Best Motorcycle Helmet for Noise Reduction
|BELL Race Star Flex DLX Helmet||Prime||Check price on Amazon|
|Arai XD4 Helmet||Prime||Check price on Amazon|
|Shoei GT-Air 2 Helmet||Prime||Check price on Amazon|
|Arai Unisex Adult Signet Full Face Helmet||Prime||Check price on Amazon|
|HJC RPHA 11 Pro Helmet||Prime||Check price on Amazon|
|Shoei Men's Rf-1200 Full Face Motorcycle Helmet||Prime||Check price on Amazon|
|SHARK Adult Flip-Up Helmet||Prime||Check price on Amazon|
|Shoei RF-SR Helmet||Prime||Check price on Amazon|
BELL Race Star Flex DLX Helmet
Star flex is a baby doll manufactured by the bell, which is a much more exciting version than its forerunners.
In this helmet, the bell improves the design of the shell by changing the thickness where needed while removing unnecessary material from the top that results in the lightness of the helmet and smarter design.
It utilizes a 3k carbon fiber shell that delivers premier performance and is held as a lightweight champion.
Let me clear that it is DOT approved helmet and Meets the FMVSS 218 Standards, so you don’t have to worry much about safety.
Bell race star flex was tested under harsh wind tunnel conditions, making it more aerodynamics, which ultimately improves the noise cancellation.
It comes with five different shell sizes so you can choose one that perfectly suits your requirements.
As far as the shape is concerned, this baby got an intermediate oval head shape and provided extra room upfront, which results in a perfect fit and perfect comfort.
Also, it comes with ProTint Photochromic Shield Technology that gives an excellent view, and you can remove it with no hassle by just a click.
Furthermore, it includes speaker pockets that allow you to have your headset while riding.
Suggested Read: Best bluetooth headset for helmets
- 3k carbon fiber shell
- Intermediate oval head shape
- Noise cancellation aerodynamics
- Five different shell sizes
- ProTint Photochromic Shield
- Speaker pockets
- DOT approved
- Meets the FMVSS 218 safety Standards
- Anit-Bacterial Liner
- Flex Impact Liner
- Triple-Density magnetic Cheek Pads
- Glasses compatible
Arai XD4 Helmet
Arai is constructed with special fiber laminate, which helps reduce weight still not lighter than carbon fiber helmets, but it can still compete with many other helmets in the market.
The brand new XD4 has got a face shield that will provide you with a clear and broad view, especially out around the peripherals.
In terms of ventilation, this helmet got several vents (especially the brow vents) through which the air circulates to your forehead. Also, the new shell shape allows better aerodynamic stability at high speeds.
As there are more vents provided in this helmet, so it means more ways for sound to penetrate the helmet; but due to the redesigned interior, it was known to keep more noise out.
Furthermore, it comes with different shell sizes so that you can pick the one that best fits on your head. The interior is provided with a Dry Cool system that wicks away any moisture and heat.
The helmet offers excellent comfort to the riders due to the fantastic new patent-pending facial contour support (FCS).
Last but not least, this helmet also got an Emergency cheek pad release system that provides ease in removing the helmet in case of an accident.
- Intermediate-round oval shape
- Can be used for motocross, full face, and adventure
- Fiberglass shell
- DOT and ECE approved
- Dry cool system
- Facial contour support (FCS).
- Emergency cheek pad release system
Suggested Read: How to remove scratches from helmet visor
Shoei GT-Air 2 Helmet
Its D.O.T. approved helmet, which is constructed with advanced integrated matrix (A.I.M.) fiberglass.
It is equipped with noise reduction technology that decreases air drag and promotes a quieter ride at high speed.
For ventilation, this helmet got various vents and EPS channels through which maximum airflow in and out of the helmet. Its also furnished with multi-density EPS liner that helps to reduce impact in case of an accident.
Furthermore, the CNS-1 face shield and baseplate system reduces fogging up face shield by allowing the face shield to open slightly.
Also, the helmet is provided with a QSV-2 inner sun shield that can be used in a bright sunny condition.
If we talk about the comfort of this helmet, then it is featured with four different EPS liner sizes that give extra comfort and excellent fit, which also reduces the noise of the wind.
The 3-D Max dry removable noise-reducing interior liner helps to provide fresh feelings and which can further be used for noise control for quieter rides.
One more great thing is that it features a quick-release emergency system that allows you to quickly remove the helmet from an injured rider in case of an accident.
- D.O.T. approved
- Constructed with advanced integrated matrix (A.I.M.) fiberglass
- Multi-density EPS liner
- CNS-1 face shield and baseplate
- QSV-2 inner sun shield
- Pinlock sun shield
- Plenty of room for using Glasses
- Quick release emergency system
- 3-D Max dry removable noise-reducing ear pads
Arai Solid Signet-X Adult Street Motorcycle Helmet
Arai helmets are told to be among the most comfortable helmets. Signet-X is one of them.
The shell is constructed with multi-layered fiberglass that is designed for flexibility and tensile strength.
The shell is fully furnished with a multi-density EPS liner that offers absorption of impacts in case of an accident.
The internal liner and cheek pads inside the helmet are fully removable and washable.
The chin straps are provided with double-D ring fasteners, which is known to be an effective fastener and offers re-adjustment for best fit.
It also has vast room to put eyeglasses while riding. As far as the noise of the helmet is concerned, Arai has made significant steps to noise reduction and introduced new thicker internal padding that is coupled with a chin curtain, which results in maximum noise reduction.
In ventilation, Signet-X got several vents to improve the ventilation, including double forehead vents, Single chin vent, quadruple rear exhaust vents, and two lower on the sides.
The package includes an Anti-fog Pinlock Insert, which is known to be the best version of insert.
It is DOT approved helmet that meets Snell and FMVSS 218 safety Standards. Also, it features EQRS that helps in the quick removal of a helmet after an accident.
- Anti-fog Pinlock Insert
- DOT and Snell 2020 approved
- Double-D ring fasteners
- Multi-layered fiberglass shell
- Multi-density EPS liner
- VAS (Variable Axis System) shield latch system
- Cheek pads with Emergency quick removal system
- Several Vents
H.J.C RPHA-11 Pro Full Face Helmet
It’s a D.O.T., and E.C.E. approved helmet which has remarkable features.
The aerodynamic shell provides impressive performance at very high speeds and provides a safe and quiet ride.
It comes with an Anti-fog insert lens and 2D Dark Smoke Flat-Racing Shield that reduces the chances of fogging up the visor in the rain. There is a vast space inside the helmet so that you can use your prescription or sunglasses while riding.
Furthermore, it features a Dual Shield lock System that enables one-touch open/close locking system. Also, the shield ratchet system gives tool-less removal and ultra-quick removal and replacement of shield, which is always a welcomed feature.
Another good thing is it is furnished with cheek pads that are designed for quick helmet removal in case of any emergency.
It is a well-ventilated helmet because of Advanced Channeling Ventilation System (A.C.S.) that provides maximum airflow through the full front to back and keep your head cool and fresh.
Its interior is furnished with polygene Infused silver chloride Technology followed by anti-bacterial fabric that gives extra comfort and enables quick-drying capabilities.
- Premium Integrated Matrix construction
- Advanced Channeling Ventilation System
- Polygene Infused silver chloride Technology in the interior
- Anti-bacterial, washable, and removable cheek pads and crown
- D.O.T. and E.C.E. approved
- Lightweight shell
- Dual Shield lock System
- The emergency helmet release system
- Anti-Fog 2D Flat-Racing Shield
- Comes with both dark and clear smoke shields
Shoei Men's Rf-1200 Full Face Motorcycle Helmet
Shoei RF-1200 is an upgrade of an already well known RF-1100 helmet and improved the quality by reducing the overall weight, reducing wind noise by improving aerodynamics, stability, and ventilation.
Shoei RF-1200 is one of the safest and most comfortable helmets that meet SNELL M2015 and D.O.T safety standards. Wearing a good quality helmet allows you to ride with full confidence and enjoy your ride.
Whether you are interested in track day or cross-country cruiser or even commuting, this helmet can be a perfect pick. The interior is lined with 3D Max-Dry system II, which removes excess moisture and gives you a fresh feeling.
The interior of this helmet is also furnished with a hypoallergenic lining that is washable and removable.
It is also featured with Emergency quick-release cheek pads, which allows a medical person to remove your helmet safely in case of any mishap. I hope this feature can remain unused.
Moreover, Shoei doesn’t compromise comfort and ventilation, so it is evident that this helmet got excellent ventilation and comfort.
- D.O.T. and Snell certified
- 3D Max-Dry System II
- Pinlock E.V.O. fog-resistant system
- Emergency quick release system (EQRS)
- Multi-Density EPS Liner
- CWR-1 Pinlock shield
- Hypoallergenic lining
The chin bar tends to flip all the way up and behind the helmet that gives dual options, and allows you to enjoy a closed and open face helmet, which is always a great feature.
The shell offers two different sizes that would enable you to choose the best fit for your head.
The best aerodynamics, rigid locking chin bar, and integrated chin curtain help noise cancellation and provide fit and comfort.
The visor system is somewhat different from Shark’s other helmets, allowing the visor to operate independently from the chin bar.
Furthermore, it comes with plenty of comforts, including an anti-scratch sun shield, vents, magnetic fastening chin curtain, integrated chin curtain, rigid locking chin bar, and pin lock.
If you want to enjoy a quiet ride with an open face, then this is the best modular helmet and an excellent pick for you.
- Two shell sizes
- Compact aerodynamic profile
- Integrated chin curtain
- Glasses compatible
- DOT and ECE approved
- The rigid locking chin bar
- Pin lock
- Magnetic fastening chin curtain
- Auto up/Auto down chin bar system
- Reduction in airborne noise
- Comes with double D rings chin buckle
Shoei RF-SR Helmet
Shoei RF-SR is indeed an expensive helmet, but the features attract every rider to purchase this helmet.
After professional riders experience, the Shoei upgraded this helmet and maximized the aerodynamic properties of the shell by adding extensive wind tunnels, which helps in rider’s comfort and freshness.
The interior of the shell is provided by dual-layer multi-density EPS liner that helps in the safety by absorbing impacts and gives comfort.
Also, the interior lining that includes cheek pads, chin straps, etc., which can be removed for washing and can be replaced if too old.
Multiple vents on the upper and lower intake help in ventilation and prevent the helmet shield from fogging. RF-SR is constructed with lightweight fiber material combined with elastic organic fibers to give a rigid and resilient performance.
Further, it is also featured with an Emergency Quick Release System suitable for safety, as discussed earlier.
- Snell and DOT approved
- Lightweight fiber material used in construction
- Pinlock pins
- Multiple vents on the upper and lower intake
- Emergency Quick Release System
- EVO fog-resistant lens
- Dual-layer multi-density EPS liner
- Includes Breath guard and chin curtain
- Five-stage rotating dial for easy shield adjustment
- CWR-1 Shield and QR-E System
We hope you loved that list of Best motorcycle helmet for noise reduction and have finally found your desired product. Feel free to comment in case of any suggestions. Share it with your friends. Happy shopping.